550mm Ceramic Vanity Top Basin | 4" Centerset Or Single Hole | Factory Direct, MOQ 20 (TG-550B / FTG-550B)

Model	TG-550B (3 tap holes) / FTG-550B (1 tap hole)
Overall size	550 x 440 x 182 mm
Type	Self-rimming drop-in vanity top basin, integrated back deck
Tap hole drilling	3-hole 4" centerset (102 mm) or single centre hole
Overflow	Yes, rear overflow
Material / finish	Vitreous china, high-gloss easy-clean glaze
Colour	White standard; custom colours to order
Drain	Fits 1-1/4" standard pop-up waste
MOQ	20 pieces per model
Packing	1 pc per 5-layer carton with EPS corner blocks

1.440 mm front-to-back suits shallow ensuites, powder rooms and hotel corridor bathrooms where a 480 mm top would crowd the door swing.

2.182 mm total depth leaves room for a top drawer under the bowl, which is what furniture makers ask for most often.

3.The rectangular bowl with a shallow front shelf keeps splash on the deck instead of the floor.

4.Replacement demand is steady: cracked vanity tops are replaced far more often than whole cabinets, and 550 mm is one of the sizes buyers search for by number.

Most returns on a drop-in top come from drilling, not from the ceramic. A three-hole top shipped to a single-mixer market cannot be corrected on site, and a single-hole top will not accept a widespread faucet. Holes are punched before firing, so the choice has to be on the purchase order. If you sell into more than one region, split the quantity across TG-550B and FTG-550B in the same container; the cartons, moulds and glaze are identical, so there is no extra tooling charge and no mixed-quality risk between the two.

We can supply a matching vanity unit built to the same 550 mm module, so you list one complete SKU instead of asking your customer to match a top to a carcass. Cabinet finish, door style and handle can be specified with the basin order. Bowl shape, overall length and deck height can also be tooled to your drawing if the volume supports it, which is the usual route for private-label ranges and hotel programmes that need a look nobody else is selling.

The 550mm ceramic vanity top basin is finished with a dense high-gloss glaze fired in our tunnel kiln, where the section temperature is held even through each stage. A tight, low-porosity surface is what keeps limescale and soap film from taking hold, so housekeeping wipes it rather than scrubs it. That matters more in rental and hotel stock than in owner-occupied homes, and it is the point worth putting in your own catalogue copy.

Each piece ships in its own carton at roughly 600 x 490 x 240 mm, about 0.071 CBM. Loaded loose, the calculation runs as follows:

40ft HQ: 20 x 4 x 11 = approximately 880 pieces, around 62 CBM.

40ft GP: 20 x 4 x 9 = approximately 720 pieces.

20ft GP: approximately 320 pieces.

Palletised loading costs roughly 10 percent of these figures but speeds up unloading at a DC. Tell us which you need before the booking, because the carton stack height changes with it.

MOQ is 20 pieces, mixed models accepted within one order. Samples ship before production, and test reports for the relevant market can be issued with the shipment. Send us the quantity, the drilling you need and your destination port, and we will come back with an FOB Tianjin price and a lead time for this 550mm ceramic vanity top basin.

Hot Tags: 550mm ceramic vanity top basin | 4" centerset or single hole | factory direct, moq 20 (tg-550b / ftg-550b), China 550mm ceramic vanity top basin | 4" centerset or single hole | factory direct, moq 20 (tg-550b / ftg-550b) manufacturers, suppliers, factory, 600mm Vanity Sink, basin, ceramic wash basin, ceramic wash basin for bathroom, ceramic wash basin sink, Modern Vanity Basin