Products Description

Round pedestal basin white

Overall size:450 L*375W*855H(mm)

Colour/Finish: white

Shape: Round

With 1 Tap Holes

Certificate: CE

Material :ceramic

Premium White Ceramic Round Pedestal Basin with 1 Tap Hole 450x375mm --CE Certified

Production Process of Ceramic Sanitary Ware

Ceramic washbasins, countertop basins, under-mount basins, and toilets all fall into the category of sanitary ware, and they share essentially the same ceramic manufacturing process. Today, we will focus specifically on the complete production process of ceramic washbasins to illustrate this standardized workflow.

The production process begins with product development and mold preparation. Upon receiving customers' physical samples or design drawings, the R&D department first analyzes the product's shape and dimensions to verify its feasibility for mass production. Once the samples or drawings are approved, technicians manually craft an original product model, which is then used to create a master resin mold. This master mold further produces plaster molds for forming and grouting. Plaster production molds are widely adopted due to their distinct advantages: high water absorption, short setting time, and low production cost.

Next comes the preparation of raw materials and body forming. High-quality clay suitable for ceramic washbasins is prepared as the fundamental raw material, laying a solid foundation for subsequent production. For the clay forming stage, manufacturers primarily use two types of professional equipment: high-pressure casting production lines and vertical casting mold production lines, both designed to shape the clay into the desired washbasin body.

After forming, the semi-finished washbasin bodies undergo drying, surface refinement, and glazing. The green bodies are first dried thoroughly, and workers repair any rough surfaces or imperfections to ensure a smooth base. A glazing process is then applied to the bodies, which not only enhances the aesthetic appearance of the finished washbasin but also improves its surface hardness and durability.

High-temperature firing serves as the most critical step in the entire process. Ceramic washbasins are fired at a high temperature ranging from 1180℃ to 1220℃. During firing, the basin body may deform due to dragging from the kiln shelf. To address this issue, modern ceramic washbasins are engineered with additional supporting structures on the back, such as tension ribs and support ribs, to maintain structural stability and prevent deformation throughout the firing process.

Finally, strict quality inspection is conducted on the fired ceramic washbasins. Each finished product is carefully tested to ensure it meets industry and customer standards, marking the completion of the entire production process.

If you are interested in our products, please feel free to inquire about our other bathroom products with different functions.

FAQ

Q: What material is the basin constructed from, and is it durable for daily use?

A: It's made of high-quality ceramic, which is really hard, scratch-resistant, and holds up well against regular cleaning products. So yes, it's totally durable for everyday bathroom use.

Q: Does the product come with the pedestal support column included?

A: The info here covers the basin and its size only. In most cases, the pedestal is either sold separately or comes as a full set. Better check with the supplier what's actually included in the package before you order.

Q: What is the exact size of the tap hole?

A: We can confirm there's 1 tap hole, but the exact diameter isn't listed. Normally it's 35mm for standard taps, but you should double-check with the manufacturer to make sure it fits your faucet.

Q: Is the basin compatible with standard European plumbing systems?

A: Yes, it uses a standard single-tap-hole design and is CE-certified, so it meets European safety and quality requirements for bathroom products.

Q: What is the weight of the unit, and how does this affect shipping costs?

A: The exact weight isn't given, but ceramic basins of this 450mm size usually weigh 15–20kg. That's pretty heavy, so importers need to plan for higher shipping costs and strong packaging to avoid damage during delivery.

product-1135-460