Floor Mounted Tankless Toilet

Floor mounted tankless toilets integrate flushing mechanisms, electronic bidet modules, and ceramic bowls into a single unit anchored directly to floor waste outlets. Operating without external ceramic water tanks, these units draw directly from building water supply mains utilizing internal solenoid valves and integrated auxiliary booster pumps. Engineered for commercial project specifications, multi-family construction, and OEM private-label distribution.

Direct-Connect Spatial Savings: Eliminates the external ceramic tank, reducing unit length to 680mm-710mm and freeing up 150mm to 200mm of floor depth compared to standard two-piece toilets.

Pressurized Jet-Siphon Flushing: Utilizes an internal 24V DC micro-pump to accelerate water through rimless bowl jets and a siphon trapway, achieving a 1000g MaP waste extraction score at 4.8 LPF.

Vitreous China Matrix: High-temperature kiln firing creates a dense ceramic body with water absorption under 0.2 percent, preventing structural cracking and odor absorption over long-term commercial duty cycles.

Isolated Electronic Enclosure: Control boards are potted in waterproof epoxy resin and isolated within an IPX4-sealed compartment separate from water lines.

Plumbing Supply Line: 1/2-inch or 3/4-inch NPT/G angle valve connection. Requires a minimum static supply pressure of 0.20 MPa and a minimum dynamic pressure during flushing of 0.12 MPa at an 18 L/min flow rate, supplied directly from building mains or internal booster pump.

Waste Pipe Alignment: S-trap rough-in setback of 305mm (12 inches) or 400mm (16 inches) from finished wall to center of 4-inch (100mm) PVC/ABS soil pipe, secured with standard floor flange alignment and rubber seal rings.

Electrical Connection: Dedicated 15A branch circuit connected to a GFCI/RCD outlet positioned 150mm to 300mm above finished floor level within an IPX4-safe zone to supply the potted driver board.

Floor Fastening: Secured via direct flange bolt anchoring into concrete or subflooring, sealed with neutral-cure sanitary silicone along the base perimeter.

Hospitality Projects: Commercial hotel guest bathrooms requiring reduced room footprints, touchless hygienic functions, and low acoustic output during night hours.

Multi-Family Developments: High-density condominium projects requiring WaterSense certification, reduced maintenance calls, and stable bulk fixture supply.

Commercial Office Facilities: Executive washrooms and corporate headquarters prioritizing touchless microwave radar sensors and rimless bowl geometry for rapid cleaning.

Senior Living & Care Facilities: Care homes utilizing automated flush sensors, heated seating, soft-close dampers, and night guidance lighting to assist users with limited mobility.

Ceramic Tooling & Molds: Custom ceramic shroud designs, proprietary rough-in dimensions, and embossed or glazed private-label logos developed from initial specification definitions.

Electronic Control Firmware: Custom button mapping on remote controls, adjustable temperature thresholds, modified auto-flush delay times, and localized user presets matching custom PCB requirements.

Electrical Configurations: Factory-assembled wiring harnesses matching NEMA (North America), BS 1363 (UK), CEE 7/7 (Europe), or AS/NZS 3112 (Australia) standards and plug requirements.

Private Label Packaging: 5-ply honeycomb export cartons, custom color box printing, barcoding, pallet configurations, and localized installation manuals tested through preliminary sample evaluations.

Hydrostatic & Pneumatic Testing: 100 percent of internal water channels undergo testing at 1.2 MPa hydraulic pressure and 0.8 MPa air pressure for 60 seconds prior to ceramic mounting.

Electrical Safety Benchmarks: Dielectric withstand testing at 1500V AC for 1 second, leakage current verification below 0.25mA, and grounding continuity checks under 0.1 ohm.

Mechanical Life-Cycle Testing: Seat and cover dampening hinges are tested to 100,000 opening/closing cycles; flush solenoids are cycle-tested to 200,000 activations.

Thermal Safety Interlocks: Triple thermal protection incorporating NTC thermistor monitoring, bi-metal thermostat switches, and physical thermal fuses on heating elements.

Packaging Structure: Enclosed within molded high-density expandable polyethylene (EPE) foam inner armor inside a 275 lb-test 5-ply corrugated master carton designed to protect the ceramic unit and sealed electronic box.

Drop Test Compliance: Certified to pass ISTA 1A / 2A 10-point drop testing standards to endure maritime container shipping and LCL transshipment.

Container Loading Capacity:
20GP Container: Approximately 180 units (Palletized)

40HQ Container: Approximately 420 units (Palletized) / Approximately 480 units (Floor loaded)

Export Documentation: Bill of Lading, Commercial Invoice, Packing List, Certificate of Origin (Form A / Form E / CO), cUPC/CE Test Certificates, and MSDS for remote control lithium batteries.

Hot Tags: floor mounted tankless toilet, China floor mounted tankless toilet manufacturers, suppliers, factory, couple toilet, lota toilet, short projection back to wall toilet 460mm, single suite commode, soft close toilet seats, wall hung back outlet toilet