What You're Ordering: Pan Only, No Cistern, No Guesswork
Distributors quoting this item need to know exactly what leaves the factory. This pan ships as the bowl and seat assembly. It does not include a cistern, in-wall frame, or flush plate - those are sourced separately to match the concealed cistern system on the project. That separation is normal for this pan-only category and it is also why we do not list this SKU as a "toilet suite."
|
Model |
M3059 |
|
Product type |
Back to wall toilet pan, pan-only supply (pan and seat; cistern not included) |
|
Overall size |
560mm (projection) x 360mm (width) x 400mm (height) |
|
Trap |
P-trap, 180mm roughing-in |
|
Material |
Vitreous china |
|
Certification |
WaterMark certified; WELS rated |
|
Seat |
Included |
|
Rimless design |
Yes |
Sized for Concealed Cistern Retrofits in Apartment and Commercial Renovation
At 400mm high and 360mm wide, this back to wall toilet pan sits within the footprint used across most Australian in-wall cistern systems, which is why it comes up in apartment retrofit and commercial restroom renovation quotes rather than new-build showroom orders. The 180mm P-trap roughing-in matches standard rough-in spacing, so trade customers replacing an existing pan-only unit are not usually re-cutting the slab or moving the waste point.
WaterMark and WELS Compliance Built for the Australian Trade Market
This pan is WaterMark certified and WELS rated, which are the two approvals Australian plumbing inspectors and builders check before a pan can go into a compliant installation. For a wholesale account, that means fewer compliance questions coming back from the builder or plumber on site, and one less certificate to chase before a project can be signed off.
Our Factory
product key technologies
Fired in a 126-Metre Tunnel Kiln, Water-Tested Unit by Unit
Our factory in Tangshan, Hebei runs one 126-metre by 3.2-metre tunnel kiln and two 82-metre by 2.8-metre tunnel kilns. The wider kilns keep unit energy consumption down and hold an even temperature profile across each cross-section, which is what keeps a firing batch of this pan consistent rather than producing pans with warping or glaze variation between the front and back of the kiln car. Before packing, each fired pan is individually water-tested on the line - not batch-sampled - to check the trap seal and glaze surface before it goes into a carton.
Built on a 309-Line Production Floor With 1,000 Staff
The factory covers 600,000 square metres across two large workshop buildings, runs 309 forming production lines, and employs around 1,000 production and management staff. Annual output is approximately 3.5 million pieces, and about 80% of that is exported, including to the United States, Europe, Canada, Africa, and Southeast Asia. For a distributor sizing up a new supplier, that export mix is the relevant number - it means container packing, documentation, and long-haul shipping are routine here, not a one-off.
Trade and Wholesale Order Support
Minimum order quantity: ~200 pcs
Standard lead time from deposit to shipment: ~35 days
Private label / carton branding for wholesale accounts: Available; OEM/ODM min. order ~200 units for buyer-branded cartons
We quote by container, not by single unit, and pricing is set up for repeat wholesale ordering rather than one-off retail sales.
Packaging & Shipping: What Happens Before Your Container Arrives
Export packaging spec: single carton with full EPS foam encasement, 5-ply corrugated board
Loading quantity per 20GP container: approximately 240–270 pcs
Loading quantity per 40HQ container: approximately 500–550 pcs
Average breakage rate on long-haul ocean freight: this factory's stated commitment on a related SKU is ≤ 1 damaged unit per container
Breakage/shortage claims policy: photo evidence of the damaged unit submitted to the supplier, then credit or replacement issued against the next order
FAQ
Q: What is a back to wall toilet pan only, and does it come with a cistern?
A: No - a back to wall toilet pan only is the ceramic pan and seat, sold without a cistern. Model M3059 is designed to pair with a separate in-wall or concealed cistern system, which is the standard setup for Australian apartment and commercial renovation projects rather than a boxed toilet suite.
Q: What are the back to wall toilet pan dimensions for Model M3059?
A: 560mm projection x 360mm width x 400mm height, with a 180mm P-trap roughing-in. These match standard Australian in-wall rough-in spacing, so it's typically a direct swap for an existing pan-only unit.
Q: Are you set up as one of the wholesale back to wall toilet pan suppliers for trade accounts, or do you sell single units?
A: We supply by container to trade and wholesale accounts rather than single retail units. MOQ and container loading quantities are confirmed per order - see the placeholders above pending factory sign-off.
Q: What certifications does this pan hold for the Australian market?
A: WaterMark certified and WELS rated. Star rating and flush volume will be added once confirmed.
Q: What happens if pans arrive broken?
A: Based on this factory's stated process on a related SKU (ESTIMATED, pending confirmation for M3059 specifically): submit photo evidence of the damaged unit, then receive a credit or replacement against your next order. Get this confirmed in writing for M3059 before relying on it for a live project.
Hot Tags: back to wall toilet pan only for trade & wholesale buyers — watermark & wels certified (model m3059), China back to wall toilet pan only for trade & wholesale buyers — watermark & wels certified (model m3059) manufacturers, suppliers, factory, bathroom commode, close back toilet, outside toilet, toilet wall hanging, wall hanging latrine seat, wall mounted wc toilet
