2 Piece Elongated Toilet Wholesale – Dual Flush 4L/6L, cUPC Listed (TZ-0425HD)

Model: TZ-0425HD
Configuration: two-piece, elongated bowl, close-coupled tank
Overall size: 730 x 418 x 790 mm (28.7" x 16.5" x 31.1")
Flush: top-mounted dual button, 4L / 6L (1.06 / 1.58 gpf)
Flushing method: siphon jet, fully glazed 2" trapway
Drainage: S-trap, 12" (305 mm) rough-in
Material: vitreous china, smooth self-cleaning glaze
Seat height: 425 mm rim, ADA compliant toilet height range
Certification: cUPC (IAPMO), EPA WaterSense
Color: white; tank logo decal available from 300 sets

Two-piece units cost less to replace when a tank cracks in transit or on a job site – your customer swaps one part, not the whole fixture. The elongated bowl adds about 50 mm of seating depth over a round front, which US homeowners now expect as standard. The 4L short flush handles liquid waste, so real household consumption sits well below the 6L full flush; that is what earns the WaterSense label and lets your retail buyers claim rebates in many US water districts.

The glaze matters more than the shape, though. Our tunnel kiln runs 126 meters long with section-by-section temperature control, so the firing curve stays stable across the full load. Stable firing means fewer pinholes and a harder glaze surface – the difference between a bowl that still wipes clean after two years and one that stains.

A flush failure in the field almost always traces back to four forming-stage causes, and we block each one on the line:

Rim holes: drilled at a 45-degree outward angle, count and diameter checked against the technical drawing before glazing. A wrong angle weakens the rim wash and leaves streaks.
Water channel bonding: the channel piece is positioned with a jig, not by eye, so the jet aligns with the trap inlet.
Channel cracks and air leaks: checked at the greenware stage; any leak kills siphon pull-down.
Final test: 100% of finished units go through a live flush test – ball pass, paper wash and water seal depth – before they reach the packing station. Not sampling. Every piece.

Standard export packing is a 5-layer corrugated carton with molded EPS foam blocks locking the bowl and tank separately, corner protectors on the tank lid. For LCL shipments or rough inland routes (Middle East, Africa), we add a wooden crate at cost. Cartons are drop-tested from 60 cm on corner, edge and face before a new packing design is approved.

Container loading for this 2 piece elongated toilet: about 106 sets in a 20GP, about 252 sets in a 40HQ, floor-loaded two tiers high with edge boards between tiers.

Transit breakage runs under 0.5% on our standard packing. If your receiving report with photos arrives within 7 days of delivery, any breakage above that threshold is replaced free in your next shipment or credited against the invoice – your choice. Claims settle in writing within 5 working days.

Production lead time: 25–35 days after deposit for standard white; add about 7 days in peak season (August–October). Shipment from Tianjin Xingang, 45 minutes from the plant, which keeps inland trucking cost and handling damage low.

Our factory is a large-scale sanitary ceramic manufacturing enterprise, with over 800 frontline employees, 309 modern forming production lines, and 7 high-pressure forming production lines. The factory covers an area of 600,000 square meters, equipped with one tunnel kiln of 126 meters in length and 3.2 meters in width, and two tunnel kilns of 82 meters in length and 2.8 meters in width. The annual production capacity reaches 3.5 million pieces, 80% of which are exported to countries in South America, North America, Europe, Africa, Southeast Asia and other regions.