Products Description
| Specification | Model 2060 |
| Product type | Back to wall / wall faced close coupled toilet suite |
| Flushing system | Rimless dual flush |
| Material | Vitreous china (fully vitrified, glazed) |
| Dimensions (D x W x H) | 625 x 360 x 825 mm |
| Trap / set-out | S-trap 100/250 mm + P-trap 180 mm (universal) |
| Compliance | WELS-rated + WaterMark certified (AS 1172.1 pan / AS 1172.2 cistern) |
| MOQ | 20 units |
| Lead time | 35 days from confirmed order |
| Customisation | OEM / ODM available (to your drawings, branding, packaging) |
| Packaging | Individually boxed; carton & container loading data on spec sheet |
Compliance and quality you can stand behind
WELS + WaterMark - both already held
Both certifications are in place before the product ships, which matters in Australia because WaterMark must be granted before a product can be registered for WELS. The suite is built to the relevant Australian standards for this product type - AS 1172.1 for the pan and AS 1172.2 for the cistern. We hand over the certificate numbers and registration details with your first order, so your compliance file is complete from day one.
Vitreous china and the rimless flush
The pan is fired vitreous china - a fully vitrified body with a glazed surface that resists staining and does not absorb water the way lower-fired ceramics can. The rimless design removes the hidden rim channel where limescale and waste collect; in practical terms that is the feature hotel housekeeping teams notice first, because there is no concealed lip to scrub. We moved this range to rimless after repeated feedback from project buyers that edge build-up was generating cleaning complaints.
How we keep quality consistent across a run
Every pan passes a flush and water-seal check and a glaze and crazing inspection before it is packed; suites that do not seal or flush cleanly are pulled on the line, not at your dock. Because the suite uses universal S-trap and P-trap positions, we dry-fit the trap configuration against the spec before crating - that is where set-out mismatches usually surface. We are glad to share our QC checklist and inspection points on request rather than quote a headline figure we cannot document.
Supply terms and OEM/ODM
• MOQ: 20 units - low enough to trial the model or fill a mixed container.
• Lead time: 35 days from confirmed order and deposit.
• OEM / ODM: both available; we produce to your drawings, branding, or packaging.
• Drainage: S-trap 100/250mm and P-trap 180mm, so one model covers multiple set-outs.
• Packaging: individually boxed; carton dimensions and container loading quantity confirmed on the spec sheet for freight planning.
• Payment: terms confirmed per order; we work with importers and project buyers on workable arrangements.
Built for projects, not just retail shelves
For hotel and apartment projects the decision is rarely about one toilet - it is about repeatable supply, paperwork that passes inspection, and a finish that survives daily commercial cleaning. The Model 2060 is specified with that in mind: a space-conscious footprint that suits compact commercial bathrooms, a rimless pan that holds up to frequent cleaning, and OEM options when a developer wants a consistent look across a build. We have supplied this style of suite into project channels, and the recurring requirement is always the same - compliance documents ready, and consistent units across the whole order.
FAQ
Q: What is the MOQ for the Model 2060?
A: 20 units. That is deliberately low so you can trial the model or include it in a mixed container before scaling up
Q: Are these toilet suites WELS-rated and WaterMark certified?
A: Yes - both are already held for this suite. We provide certificate and registration numbers with your order so your compliance file is complete.
Q: Is the Model 2060 a back to wall or a close coupled suite?
A: Both terms apply. It is a close coupled toilet suite (the cistern sits directly on the pan) installed back to wall, so the pan sits against the wall and conceals the trap.
Q: What trap configurations does it support?
A: Universal drainage - S-trap at 100/250mm and P-trap at 180mm - so a single model fits varied set-outs without stocking multiple versions.
Q: Can you produce OEM/ODM versions?
A: Yes. We manufacture to your drawings, branding, and packaging, which suits developers wanting a consistent specification across a project.
Q: What is the lead time?
A: 35 days from confirmed order and deposit. We confirm the schedule in writing when the order is placed.
Q: Why a rimless flush?
A: It removes the concealed rim channel where waste and limescale collect, which cuts cleaning time and the cleaning-related complaints common in hotels and apartments.
Q: What are the dimensions?
A: 625 x 360 x 825mm (D x W x H). Full dimensions and carton/loading data are on the spec sheet.
Hot Tags: back to wall toilet suites — wels-rated & watermark certified, moq 20 for trade & project buyers (model 2060), China back to wall toilet suites — wels-rated & watermark certified, moq 20 for trade & project buyers (model 2060) manufacturers, suppliers, factory
