Where It Works Best
Not every toilet fits every project. The FTZ-0420D consistently performs well in these specific sourcing situations:
Multi-unit apartment renovation (30–200 units) A general contractor retrofitting a 1980s mid-rise needs a toilet that drops into an existing 305mm floor flange without shimming, clears the bowl reliably on both flush volumes, and comes with the seat already attached. The FTZ-0420D ships ready to install. At this volume, the 35–45 day lead time and 20-unit MOQ allow phased delivery across floors without carrying excess inventory on-site.
01
Regional distributors adding a compact SKU Distributors supplying plumbing merchants in markets where smaller bathrooms are common - urban condos, secondary suites, manufactured housing - need a toilet that fits a 680mm depth footprint. Most standard two-piece models run 700mm or longer. The FTZ-0420D's compact profile solves that problem without switching to a wall-hung configuration, which carries higher installation cost for the end contractor.
02
Rental property management companies A management company standardizing across 150 units wants two things: a toilet that generates minimal maintenance calls and one that a plumber can swap out using a locally available wax ring and standard floor bolts. The FTZ-0420D uses a conventional S-trap configuration - no proprietary floor connection, no special tooling. The Biscuit color option also matches older fixture sets in pre-2000 builds without requiring a full bathroom refresh.
03
Budget hotel and motel refurbishment (50–150 rooms) Operators refitting budget properties need a toilet that performs consistently across hundreds of guest uses per week, keeps housekeeping time low, and does not generate front-desk complaints about incomplete flushes. The dual flush mechanism on the FTZ-0420D uses an industry-standard fill valve - replaceable locally, no proprietary parts dependency. The slow-close seat reduces noise complaints in thin-wall room configurations.
04
OEM private-label programs for regional brands Mid-size plumbing brands in the US, Canada, and Australia looking to add a compact two-piece toilet to their catalog without minimum quantities that require a full container can start with 20 units for sample and catalog photography, scaling to container quantities once the SKU is proven. Custom packaging, color box branding, and model number designation are all available under ODM terms.
05
Specification Table
|
Specification |
Detail |
|
Model |
FTZ-0420D |
|
Configuration |
Two-piece (separate tank and bowl) |
|
Flush system |
Siphonic jet |
|
Flush volume |
3L / 6L - 0.8 GPF / 1.6 GPF (dual flush) |
|
Rough-in |
305mm / 12 inch |
|
Trap type |
S-trap, floor outlet |
|
Product dimensions |
680 × 418 × 734mm (26.8" × 16.5" × 28.9") |
|
Bowl depth (seat to floor) |
385mm / 15.2 inch |
|
Colors available |
White / Biscuit |
|
Seat |
Slow-close, included |
|
Certifications |
UPC · CSA · CE · ISO 9001 |
|
MOQ |
20 pcs |
|
Lead time |
35–45 days from deposit |
|
OEM / ODM |
Available |
|
Origin |
Tangshan, China |
Why This Works for Wholesale Buyers
A real sourcing scenario
Marcus, a plumbing distributor based in Alberta, came to us after a frustrating experience with a previous supplier. He had ordered 60 units of a compact toilet for a seniors' housing renovation project and received 11 units in the wrong color - a beige that did not match the Biscuit specification in his purchase order. The project manager rejected the batch. Marcus needed a replacement shipment in under six weeks and a supplier who could verify color consistency before the container was loaded.
We ran a pre-shipment color check against the RAL reference standard on all 60 replacement units, photographed the batch before palletizing, and sent the documentation within 24 hours of loading confirmation. The container cleared customs in Vancouver with three days to spare before his install window opened. Marcus now orders quarterly.
The reason this was possible: our Tangshan facility runs three tunnel kilns - one at 126 meters × 3.2 meters and two at 82 meters × 2.8 meters - with kiln temperature logged per batch. Color consistency across a production run is a function of controlled firing conditions, not manual inspection at the end of the line. When a buyer asks us to confirm Biscuit across 60 units, we can show them the kiln log, not just a photograph of the first five pieces.
Who this product is not right for
The FTZ-0420D is not the right specification for high-traffic commercial washrooms - airports, stadiums, office towers with 200+ daily users per fixture. Those applications need pressure-assisted or commercial-grade gravity systems with heavier-gauge ceramic and wider trapway clearance. If that is your brief, we will tell you before you place an order, not after.
It is also not suited to below-grade installations without an ejector system. The siphonic flush mechanism requires gravity-assisted drainage. Basement bathrooms or below-sewer-line applications need a macerating or upflush configuration - outside this product's specification.
Frequently Asked Questions
Q: Does this toilet meet WaterSense and state-level water efficiency requirements in the US?
A: The dual flush volumes on this model - 1.0 GPF (4.8L) and 1.28 GPF (6L) - meet the EPA WaterSense threshold of 1.28 GPF maximum for the full flush. This satisfies the standard residential requirement in all 50 US states, including California's Title 20 and Colorado's plumbing code. For commercial applications in states with stricter requirements (some specify 1.1 GPF or lower), please confirm with your local code authority before ordering. We can provide the flush performance test report on request.
Q: Does this two piece siphonic toilet support OEM branding?
A: Yes. We offer full OEM and ODM service on this model, including custom logo application on the ceramic body, custom tank lid branding, and custom outer packaging design. Minimum order for OEM production varies by customization type - contact us with your branding requirements and we'll confirm MOQ and lead time. Standard production lead time for OEM orders is 35–50 days from deposit confirmation.
Q: Does the internal trapway have full glazing, and why does it matter?
A: Yes. The FTO-8848 uses 360° full-pipe glazing on the entire internal waterway from inlet to outlet. Most entry-level ceramic toilet models use partial glazing on the trapway to reduce production cost. Full glazing creates a smoother surface that resists limescale and biofilm buildup, which directly reduces the frequency of incomplete-flush complaints - particularly in regions with hard water above 180 mg/L. For distributors, fewer field complaints means fewer warranty calls and lower after-sales cost per unit sold.
Q: What is the warranty, and how does a claim work?
A: This model carries a 5-year warranty against manufacturing defects, including cracking, glazing failure, and flushing mechanism failure under normal use conditions. Pre-shipment inspection is standard on every order - we conduct a flush test, dimensional check, and surface inspection on 100% of units before loading. If a defect is identified post-arrival, we handle claims by providing replacement parts or replacement units on your next order, depending on the nature and volume of the issue. Claims documentation requirements are simple: photos and a written description of the defect.
Q:Can I order mixed SKUs in one container - for example, this model alongside a basin or vanity?
A: Yes. We accept mixed-SKU container orders, which is the standard arrangement for most of our North American distributor accounts. Combining toilet models, pedestal basins, and other ceramic sanitary ware in one 20ft or 40ft container is straightforward from our end. This lets you test multiple product lines with a single freight cost, which is particularly useful if you're introducing our products to a new sales region or customer segment. Contact us with your target SKU mix and quantities and we'll confirm the loading plan.
Q：How does the FTZ-0420D compare to similarly specced retail toilets like the TOTO Aquia IV or American Standard H2Option in terms of performance and value for bulk orders?
A:The TOTO Aquia IV and American Standard H2Option are both two-piece dual flush toilets with 12-inch rough-in - the same core configuration as the FTZ-0420D. At retail, those models sell for $350–$500 and $200–$280 per unit respectively at Home Depot or Lowe's. That retail price reflects brand equity, multi-layer distributor margin, and in TOTO's case, proprietary glaze technology (CeFiONtect) that genuinely reduces cleaning frequency in high-traffic settings. For a buyer purchasing one or two units for a residential bathroom, those factors may justify the price. For a buyer placing a 50-unit project order, the calculation is different. The FTZ-0420D carries UPC and CSA certification - the same compliance standard that TOTO and American Standard meet for the US market. The ceramic is vitreous china fired in a tunnel kiln with logged temperature control. The fill valve is industry-standard, not proprietary. What you are not paying for is the retail brand name and the three-layer margin stack between the factory and the store shelf. If your project specification requires TOTO by name, buy TOTO. If it requires a UPC-certified dual flush toilet that fits a 305mm rough-in and performs reliably across 50 rooms, request a sample and compare the specs directly.
https://www.hfybath.com/info/what-actually-paying-for-in-a-wholesale-103500865.html
Hot Tags: compact two-piece toilet for contractor supply, China compact two-piece toilet for contractor supply manufacturers, suppliers, factory, back inlet toilet, concealed wall cistern, pink toilet, modern wall hung toilet, btw pan, commode flush
