The glazing of sanitary ceramics can be divided into manual glazing and mechanical glazing. Manual glazing is further categorized into two types: manual spray booth glazing and circulating glazing line glazing. The primary glazing method adopted is spray glazing-specifically, using a spray gun to atomize the glaze slip with compressed air and spray it onto the surface of the ceramic body. The body quickly absorbs the moisture in the glaze slip, forming a relatively hard adhesive glaze layer.

In addition to spray glazing, supplementary glazing methods are applied when necessary, including:
Dip glazing: Submerging the ceramic body in the glaze slip and removing it after a few seconds.
Brush glazing: Applying the glaze slip to the body surface with a brush.

Flushing glazing for drainage channels: Filling the sewage pipes of toilet bowls and squatting pans with glaze slip, then pouring off the excess after several seconds to complete the glazing of the pipe inner walls.
